Electro static Decorative Powder Paint

Artistic Powder Coating 1.General Introduction This series of coating film has grain results such as wrinkle, sand ripple, hammertone,crack, and so on. It also has the performances of aforesaid series, it not only increases aesthetic measure of coated articles, but also makes up the shortcoming of uneven surface of metal casting. It can be widely applied to coating of various mechanical equipment, housing of electronic computer, security door and so on products that require special decoration. 2.Product Series Products with various appearance like sand veins, hammer tone, wrinkle, crackle, silk veins, marble veins and metallic veins are available. Products of different gloss can be provided according to the customers' demand. 3.Physical properties of the powder Density (g/cm³, 25): 1.2-1.8 Granularity distribution: 100% below 100um (Depending on the demand of art effects, It can be adapted to the specific demand of coating) 4.Curing Condition Depending on the types of different products. 5.Coating performance Testing ItemsStandards and MethodsInspecting IndexImpact StrengthGB/T 1732-199330-50kg/cmErichsen TestGB 9753-19886mmAdhesion CHECKED TESTGB/T 9286-1998Grade 0Bending resistanceGB 6742-19863mmPencil HardnessGB/T 6739-19961H-2HSalt mist resistanceGB 1771-1991500hHeat & moist resistanceGB 1740-19891000hNotations1. The tests above used the cold rolling steel plate of 0.8 mm thick with preceding standard treatment. The thickness of the coating layer is 60-80μm.2. The above performance index may slightly vary with the variation of the product types and artistic effects.